Installation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
Customer Reviews
Best ones on the market
Installed on a 2nd gen Dodge ram 2500 they are a must when running newer generation Dodge wheels, I have a set on all three of my trucks, I tow a 45ft RV and heavy equipment for work and they yet to fail me
Great product and would recommend to anyone
Ordered these spacers to alleviate tire rub on my frame. They did the job fine the problem was the fact that they DO NOT COME OFF. They were installed on a 2022 Duramax. After cleaning the hub with a wire brush and emery cloth and putting them on I noticed my brakes were getting low and decided I would change them the next afternoon. Next day I went to pull my pads and rotors and 3 of the 4 spacers did not survive. The only way I could remove them was a hammer and chisel. After I had them off they looked more like deformed frisbees than wheel spacers. I haven't put calipers on them yet but I'm sure the tolerances are all over the place on hub diameter. All in all I would consider a more high quality brand like Bora over this product.
Good