1" (25mm) Wheel Spacers for Classsic Chevy Oldsmobile Pontiac | 5x4.75 | 7/16 Studs |
1" (25mm) Wheel Spacers for Classsic Chevy Oldsmobile Pontiac | 5x4.75 | 7/16 Studs |
Space out your wheels for a more aggressive stance or increased suspension and brake clearance.
These Titan Wheel Accessories 1 Inch wheel spacers are designed with a 5x4.75 (5x120) bolt pattern and 7/16 thread pitch for Classic Chevrolet Camaro, Chevelle, Corvette, El Camino, Malibu, Impala, Buick Skylark, Regal, GS, Oldsmobile Cutlass and Starfire. They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
Specifications
Specifications
- Vehicle Bolt Pattern: 5x4.75 (5x120)
- Wheel Bolt Pattern: 5x4.75 (5x120)
- Hub Bore: 70.5
- Thread Pitch: 7/16"
- Thickness: Each spacer measures 1 Inch (25mm) thick
Materials
Materials
- Our spacers are machined from billet T6 6061 aluminum
- Black finish
Vehicle Fitment
Vehicle Fitment
These spacers will bolt up to the following vehicles:
1964-1969 Buick Skylark
1964-1969 Buick Special
1955-1957 Chevrolet Bel Air
1965-1967 Chevrolet Biscayne
1967-1981 Chevrolet Camaro
1980-1989 Chevrolet Caprice
1964-1972 Chevrolet Chevelle
1962-1965 Chevrolet Chevy II
1958-1970 Chevrolet Impala
1968-1974 Chevrolet Nova
1968-1969 Oldsmobile 442
1964-1972 Oldsmobile Cutlass
1964-1967 Oldsmobile F-85
1968-1981 Pontiac Firebird
1966-1971 Pontiac GTO
1964-1965 Pontiac Tempest GTO
Vehicle fitment information applies only to the vehicle's hub.
View full detailsInstallation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
I am using these on a 1969 12 bolt out of a Camaro that is now in a 1959 Chevy truck. They are of good quality, however, the center hole was .040 too small and I had to machine it to make them fit. Other than that, I am satisfied with the product
Great product
Good quality just a little tight on the center hub.
Fits well. Very sturdy
purchased for my stock 1978 el camino, fit great! i put 2 of them in the rear. It was neat that it came with a total of 4 spacers in the box.
Let customers speak for us
from 2469 reviewsAfter lifting the s10 and putting 31s on the factory wheels the steering was cut down due to rubbing and both front and rear tires looked ridiculous because the wheels were tucked and it didn’t look like the truck it deserved to be, using Titan spacers 1.5in in the front and 2in in the rear it made the truck look like it was supposed to look from factory
It came super fast and they look really clean
Excellent fit and the quality is amazing!
I couldn't be happier with my purchase.
It looks great and drives just fine so I have zero regrets.
If you're on the fence about it, just go for it.
Easy ordering and fast shipping!
Great tough quality, adds a lot to the car.
They are good quality made and look and work great.
Product was delivered before estimated date, which was nice. Solid construction amd super easy to install. Would recommend.
Great craftsmanship, and super fast shipping. This is the second time buying from Titan. They do not disappoint. Thank you
Great look on the car
Fast delivery
The product came well packed in box I installed the on my 2018 C7 GS thinking I was going to scratch a bit the lugs …NOPE not even a scratch on product…and they great !
Best use these to fit Camaro rims on a 88-98 Chevy truck
1/4" Wheel Spacers for Jeep Grand Cherokee Commander Wrangler | 5x5 (5x127) |
I’ve seen alot of reviews on google about poor customer service, not being able to contact, etc etc. I personally think the issue may be the customers posting the reviews. I received my set of adapters quickly, but they were damaged by UPS. I emailed customer service, and within an hour or so I received not only a response, but they shipped me a complete new set which I received within 2 days. Furthermore, I offered to return the damaged set, and Titan told me to just keep the damaged set. The adapters are high quality, and if installed correctly, work perfectly. I had seen other reviews where people had issues with wheels falling off, again, due to obvious improper installation. You gotta have a little common sense folks. If your hub studs protrude past the surface of the adapter face, you obviously have to shorten your Hub studs, DUH!!! Great Company, Great Quality, Great Customer service. Thank You Titan Accessories, and shame on the bad review people for not realizing that they are at fault for poor installation….