12 x 1.25" Bulge Open End Acorn Lug Nuts | 17mm Head | Black Open End Lug Nuts
12 x 1.25" Bulge Open End Acorn Lug Nuts | 17mm Head | Black Open End Lug Nuts
Specifications
Specifications
Thread Pitch: 12x1.25
Materials
Materials
- Made from steel that has been through-hardened - these are a one piece lug, and have NO outside sleeve like most OEM lugs
- Black Finish
Vehicle Fitment
Vehicle Fitment
- If you have any fitment questions feel free, to send us an e-mail.
- These will thread on to any vehicles that have a 12x1.25 thread pitch, and work with wheels that require conical seat lug nuts.
- These WILL NOT WORK with OEM caps that require the use of a lug nut to hold them on
Vehicle fitment information applies only to the vehicle's hub.
Specifications
Vehicle Fitments
If you have any fitment questions just send us an email
These will thread to any Vehicle Models that have a 12 x 1.25" Thread Pitch, in which the wheels have conical seat lug nuts
These WILL NOT WORK with OEM caps that require the use of a lug nut to hold them on
Additional Information
- These lugs are typically used with aftermarket wheels, these are a conical seat
- The compatibility is based off the thread pitch that the vehicle requires, please check your wheels to ensure correct fitment
- These are not a replacement for OEM Lug nuts (however they may be compatible with the OEM Wheels) You will need to check you wheels to ensure correct fitment
- Made from steel that has been through-hardened - these are a one piece lug, and have NO outside sleeve like most OEM lugs
- Please ensure that these are the correct lugs for you vehicles wheels prior to purchase
Additional Information
- These lug nuts are typically used with aftermarket wheels, as these have a conical seat.
- The compatibility is based off of the thread pitch that the vehicle requires, please check your wheels to ensure correct fitment.
- These are not a replacement for OEM Lug nuts, however they may be compatible with the OEM Wheels. You will need to check your wheels to ensure correct fitment.
- Please ensure that these are the correct lugs for you vehicles wheels prior to purchase
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
Let customers speak for us
from 2080 reviewsGot these as a gift for my dad's nc mx5 and he could not be happier with them. It's been about a month and they are great, look great and we're simple to install. Highly recommend for the oem+ look.
Great product.
Very well made, great fit, mounts solid
I got a set of wheels for my Suzuki samurai and they didn't quite have enough back spacing. These 1" spacers were the ticket. Check out my youtube video on the install @CTMadModz
I put these on my 1999 dodge ram 2500. They made the tires even with plastic fender flares I added. No need to cut factory lugs shorter and probably wouldn't need to with 1 1/2" spacers either. Thicker impact sockets don't fit inside lug well of spacers but regular sockets do, no problem. Definitely use anti seize paste so they don't stick to the rotor.
Shit was bad ass fits good
I installed these on my 2012 Silverado 3500 HD (SRW). I cleaned the hubs and torqued the lug nuts / spacer nuts as instructed. I have traveled several hundred miles, at speeds up to 75 mph. There is no shaking at all. I have a stock tire and wheel setup and only have a small amount inner fender rubbing at full lock. Very happy!
Fast shipping , got what I ordered!
I’m using these spacers to put 2017 wheels on my 2000. They are a very snug fit on the hub. I cleaned with a wire brush and sand paper. Used anti seize on the surfaces. They are nice quality spacers. I’ve only put about 400 miles on the so far
Gives my truck the look I was looking for
50mm (2") Wheel Spacers for Infiniti and Nissan Trucks | 6x5.5 (6x139.7) | 12x1.25 Studs |
Work just fine.
Great product have had them on for a couple thousand miles and no problems
2010 Mazda MX-5/Miata, I love my OEM GT wheels but never loved the OEM offset, these spacers have corrected them. The ride feel is the same as OEM or better and it gives it that OEM+ look that I was looking for. As of this time, I can definitely recommend these spacers!
1.5" (38mm) Wheel Spacers for Chevy Colorado GMC Canyon | 6x120 | 66.9 Hubcentric |14x1.5 Studs |