1.5" (38mm) Wheel Spacers for Chevy Silverado GMC Sierra 2500 3500 | 8x180 | 124.1 Hubcentric |14x1.5 Studs |
1.5" (38mm) Wheel Spacers for Chevy Silverado GMC Sierra 2500 3500 | 8x180 | 124.1 Hubcentric |14x1.5 Studs |
Share
Space out your wheels for a more aggressive stance or increased suspension and brake clearance.
These Titan Wheel Accessories 1.5 Inch wheel spacers are designed with a 8x180 bolt pattern and 14x1.5 thread pitch for Chevy Silverado 2500, Chevrolet Silverado 3500, GMC Sierra 2500 and 3500. . They are machined from T6 6061 billet aluminum, making them both lightweight and durable. These spacers will improve the stance of your vehicle, providing a more aggressive look while also adding additional clearance for aftermarket brake and suspension parts. They also allow for larger wheel and tire combinations to be installed, giving you more options for customization. These spacers are easy to install and come with all necessary hardware.
These wheel spacers come with everything needed for full installation.
These hubcentric spacers will fit the front only and will not fit the rear. Hubcentric spacers ordered in a set of 4 will come with 2 Hubcentric spacers for the front and 2 Lugcentric spacers for the rear.
Specifications
Specifications
- Vehicle Bolt Pattern: 8x180
- Wheel Bolt Pattern: 8x180
- Hub Bore: 124.1
- Thread Pitch: 14x1.5
- Thickness: Each spacer measures 1.5 Inch (38mm) thick
Materials
Materials
- Our spacers are machined from billet T6 6061 aluminum
- Black finish
Vehicle Fitment
Vehicle Fitment
These spacers will bolt up to the following vehicles:
2011-2023 Chevrolet Silverado 2500
2011-2023 Chevrolet Silverado 3500
2011-2020 GMC Sierra 2500
2015-2023 GMC Sierra 2500 HD
2011-2023 GMC Sierra 3500
Vehicle fitment information applies only to the vehicle's hub.
View full detailsInstallation Information
- Please ensure that the your vehicle has the same studs as the adapters, otherwise additional lug nuts WILL BE required
- Make sure that all lug nuts get a full 6-8 turns when tightening. Failure to do so, can result in damage to your vehicle.
- Installation needs to be performed by a trained professional
It's Possible that your OEM Studs are longer than the spacer is thick, if so you have a few options:
- Your lugs studs will need to be shortened by grinding them down or you can replace your OEM lug studs with shorter studs.
- If your wheels have sufficient sized and placed pockets machined in the backside, between the mounting holes, then you should not need to modify your factory wheel studs.
- Always ensure that there is no gap between the spacer and the back of the wheels.
-
Same Day Shipping
Orders placed before 3:00 PM EST will be shipped out same day. Weekend and Holiday orders will be shipped promptly on the following business day.
-
Questions?
Feel free to reach out to us with any questions. Our staff is highly trained and happy to help you find the correct product for your vehicle. You can email us at info@titanwheelaccessories.com
I installed these on my 2012 Silverado 3500 HD (SRW). I cleaned the hubs and torqued the lug nuts / spacer nuts as instructed. I have traveled several hundred miles, at speeds up to 75 mph. There is no shaking at all. I have a stock tire and wheel setup and only have a small amount inner fender rubbing at full lock. Very happy!
Approximately 500 miles on them so far with no issues. They gave my truck the stance I was looking for.
Well made product. Easy to install. Did what I was looking for instead of buying new wheels. Have pulled my trailer without issues, truck runs true.
1.5" (38mm) Wheel Spacers for Chevy Silverado GMC Sierra 2500 3500 | 8x180 | 14x1.5 Studs |
Let customers speak for us
from 2080 reviewsGot these as a gift for my dad's nc mx5 and he could not be happier with them. It's been about a month and they are great, look great and we're simple to install. Highly recommend for the oem+ look.
Great product.
Very well made, great fit, mounts solid
I got a set of wheels for my Suzuki samurai and they didn't quite have enough back spacing. These 1" spacers were the ticket. Check out my youtube video on the install @CTMadModz
I put these on my 1999 dodge ram 2500. They made the tires even with plastic fender flares I added. No need to cut factory lugs shorter and probably wouldn't need to with 1 1/2" spacers either. Thicker impact sockets don't fit inside lug well of spacers but regular sockets do, no problem. Definitely use anti seize paste so they don't stick to the rotor.
Shit was bad ass fits good
I installed these on my 2012 Silverado 3500 HD (SRW). I cleaned the hubs and torqued the lug nuts / spacer nuts as instructed. I have traveled several hundred miles, at speeds up to 75 mph. There is no shaking at all. I have a stock tire and wheel setup and only have a small amount inner fender rubbing at full lock. Very happy!
Fast shipping , got what I ordered!
I’m using these spacers to put 2017 wheels on my 2000. They are a very snug fit on the hub. I cleaned with a wire brush and sand paper. Used anti seize on the surfaces. They are nice quality spacers. I’ve only put about 400 miles on the so far
Gives my truck the look I was looking for
50mm (2") Wheel Spacers for Infiniti and Nissan Trucks | 6x5.5 (6x139.7) | 12x1.25 Studs |
Work just fine.
Great product have had them on for a couple thousand miles and no problems
2010 Mazda MX-5/Miata, I love my OEM GT wheels but never loved the OEM offset, these spacers have corrected them. The ride feel is the same as OEM or better and it gives it that OEM+ look that I was looking for. As of this time, I can definitely recommend these spacers!
1.5" (38mm) Wheel Spacers for Chevy Colorado GMC Canyon | 6x120 | 66.9 Hubcentric |14x1.5 Studs |